dial pulse मीनिंग इन हिंदी

The subscriber's dial pulsed at about 10 pulses per second, although the speed depended on the standard of the particular telephone administration.
The flash is longer than a rotary dial pulse, sometimes called a " short flash ", and is shorter than a hang-up ( on-hook ).
Using DC voltage changes, the local switch would send a signal to get ready for a call and the remote switch would reply with an acknowledgment to go ahead with dial pulsing.
With Switched 56 DDS, bit eight is pulsed ( alternately set to logical ZERO and ONE ) to transmit two state dial pulse signaling information between a SW56 DDS CSU / DSU, and a digital end office switch.
A few peripherals that needed quicker response time, such as Dial Pulse Transmitters, were controlled via Central Pulse Distributors, which otherwise were mainly used for enabling ( alerting ) a peripheral circuit controller to accept orders from the Peripheral Unit Address Bus.